Where Are Green Creative LED Flat Panels Manufactured?

Green Creative still has LED flat panel pages on its website.

That does not necessarily mean those panels are still in active production.

Green Creative’s original 2×2 and 2×4 panels were China-origin, edge-lit products introduced almost a decade ago. After Green Creative joined the same corporate group as Industrial Lighting Products, newer project materials began directing buyers toward ILP’s backlit VPAN Select platform.

Today, the brand name, website, product page and factory may tell four different stories.

The Direct Answer

The available evidence supports three separate conclusions:

1. Legacy Green Creative 30PAN22DIM and 38PAN24DIM panels were part of a China-centered supply chain.
2. An identifiable 38PAN24DIM 2×4 model is listed with China as its country of origin.
3. The current ILLUMUS platform increasingly uses ILP products for backlit panels, but this does not make old Green Creative-branded panels U.S.-made.

The safest answer is therefore:

Legacy Green Creative LED flat panels were manufactured in China. The current active status and origin of any Green Creative-branded panel must be verified because the group’s panel strategy has shifted toward ILP product platforms.

One Brand, Three Product Identities

Green Creative panel searches now lead buyers into three different product generations.

Identity 1: The original Green Creative edge-lit panel

The Green Creative ELEVATE panel family includes:

• 30PAN22DIM/830/277V
• 30PAN22DIM/835/277V
• 30PAN22DIM/840/277V
• 38PAN24DIM/830/277V
• 38PAN24DIM/835/277V
• 38PAN24DIM/840/277V

These products were introduced in 2017 and remain visible on the Green Creative website.

The official 2×4 panel page describes a 38W edge-lit fixture with:

• 4,150 or 4,300 lumens
• 3000K, 3500K or 4000K
• 120–277V
• 0–10V dimming
• UGR below 19
• 75,000-hour L70 rating
• Ten-year warranty

The corresponding 2×2 panel uses 30W and delivers up to 3,450 lumens.

These specifications were competitive when launched. But the underlying datasheets and installation instructions date back to 2017.

Identity 2: Old distributor inventory

A product can disappear from normal production while remaining visible in search results and distributor databases for years.

For example, Zoro identifies 38PAN24DIM/830/277V as a China-origin product and marks it discontinued.

Another electrical distributor also lists the same model as discontinued with no warehouse inventory.

This creates a common B2B trap:

An indexed manufacturer page can look current even when the channel is selling remaining stock or no longer accepting normal replenishment orders.

Before specifying the product, buyers should ask whether it is:

• Active production
• Made to order
• Available only from old inventory
• Replaced by another Green Creative model
• Replaced by an ILP fixture
• Supported only for warranty purposes

Identity 3: The ILP backlit replacement platform

Green Creative and Industrial Lighting Products are now part of the same ILLUMUS lighting platform.

Current application brochures describe a backlit flat panel called VPAN Select. However, VPAN Select is an ILP product—not a traditional Green Creative ELEVATE panel.

The ILP VPAN Select page lists:

• 1×4, 2×2 and 2×4 sizes
• Backlit construction
• Selectable lumen packages
• 3500K, 4000K and 5000K options
• Up to 154 lumens per watt
• 0–10V dimming to 10%
• DLC-qualified configurations
• ETL listing
• Five-year standard warranty
• Ten-year optional warranty

The same page now labels VPAN Select as “Phasing Out.”

That is an important commercial signal. A 2025 application brochure may recommend VPAN Select while the current product page indicates that the series is being retired.

For a distributor or project specifier, that conflict matters more than the marketing description.

Green Creative Was Acquired—But the Brand Did Not Simply Disappear

In 2017, Green Creative was acquired by a Harbour Group portfolio company that also owned ILP.

The original acquisition announcement stated that Green Creative and ILP would remain separate brands. It also identified Green Creative’s Shanghai R&D presence and ILP’s U.S. manufacturing capabilities.

The relationship has since evolved into the ILLUMUS platform, described as being powered by Green Creative and ILP.

In practical terms:

• Green Creative remains visible as a brand.
• ILP supplies a broader range of commercial and industrial fixtures.
• The two businesses share sales and project resources.
• Certain fixture categories have shifted toward ILP platforms.
• Legacy Green Creative pages remain indexed.

Therefore, a quotation using the words “Green Creative panel” may not tell the buyer which legal entity, brand or manufacturing platform will actually supply the project.

Where Was the Legacy Panel Manufactured?

The clearest model-level evidence points to China.

Zoro lists the Green Creative 2×4 model 38PAN24DIM/830/277V with China as the country of origin. Historical import records also show Green Creative receiving LED lamps, drivers, fixtures and related products from Green Creative operations in Shanghai.

The 2017 acquisition announcement described Green Creative as having a Shanghai R&D center and global supply-chain capabilities. Later import records continued to show Green Creative Limited in China supplying the U.S. business.

This does not prove that every Green Creative product was made at the same Chinese factory.

It does establish a credible conclusion for the audited panel family:

The original ELEVATE edge-lit panels were China-sourced products rather than California- or Florida-manufactured fixtures.

Edge-Lit vs. Backlit Is Not a Cosmetic Substitution

Replacing the old Green Creative panel with an ILP VPAN or another backlit panel is not necessarily a like-for-like change.

Legacy Green Creative edge-lit design

The LEDs are positioned around the edge of a light-guide plate. Light is distributed across the panel and redirected downward.

Potential advantages include:

• Thin appearance
• Controlled optical distribution
• Low-glare design
• Architectural presentation

Potential purchasing concerns include:

• Light-guide plate aging
• Greater sensitivity to material quality
• Possible yellowing or output change over time
• Higher dependence on optical-film consistency

Newer backlit panel design

LEDs are mounted behind the diffuser and direct light downward.

Potential advantages include:

• Simpler optical structure
• No conventional edge-lit light-guide plate
• Higher efficacy potential
• Easier scalable production
• Lower material and assembly cost

Potential concerns include:

• Greater fixture depth
• Visible LED pattern if optical spacing is poorly designed
• Different glare and beam characteristics
• Different appearance when mixed with existing panels

A backlit replacement may be newer and more efficient, yet still fail a renovation project if its dimensions, visual appearance or photometric distribution do not match the installed Green Creative panels.

The Counterintuitive Warranty Problem

The legacy Green Creative panel advertised a ten-year warranty.

The newer ILP VPAN platform lists a five-year standard warranty, with a ten-year option.

A buyer might assume the older panel therefore offered better long-term value. That conclusion ignores product continuity.

A ten-year warranty has limited project value when:

• The original model is discontinued
• The replacement uses a different optical system
• Replacement panels do not visually match
• The original 3000K or 3500K configuration is unavailable
• Labor and access costs are excluded
• The replacement driver has different dimming behavior

For a commercial project, ten years of compatible replacement availability may be more valuable than a ten-year fixture-only warranty.

Does ILP’s U.S. Manufacturing Make Green Creative Panels American?

No—not automatically.

ILP operates manufacturing and assembly capabilities in Sanford, Florida. The ILLUMUS group also publishes BAA- and BABA-compliant product information for selected fixture families.

But group-level U.S. manufacturing capability does not change the origin of an imported Green Creative panel.

These claims must be separated:

• Green Creative is part of a U.S. lighting group.
• ILP operates a U.S. facility.
• Certain ILP configurations may qualify under BAA or BABA requirements.
• A specific Green Creative panel is BAA or BABA compliant.

Only the last statement applies to the product being purchased, and it requires model-specific evidence.

The buyer should request:

• Exact BAA or BABA part number
• Domestic manufacturing declaration
• U.S. factory location
• Domestic component calculation
• Applicable agency or funding requirement
• Written confirmation covering the purchase order

A standard imported model and a BABA configuration may look almost identical while having different part numbers, components and prices.

The Tariff Risk Depends on How the Product Is Purchased

The same China-origin Green Creative panel can create different tariff exposure depending on the transaction.

Buying old stock from a U.S. distributor

The panel has already entered the United States. Any import duty was generally incorporated into the distributor’s landed cost.

The purchaser is not creating a new import event.

However, the real risk is replenishment. The distributor may not be able to replace the product at the same price or specification.

Directly importing a China-origin replacement

The importer must evaluate:

• HTS classification
• Normal duty
• Applicable Section 301 measures
• Other duties effective on the entry date
• Customs value
• Country-of-origin marking

The USTR Section 301 guidance requires importers to begin with the exact HTS subheading.

Purchasing a U.S.-assembled ILP alternative

The buyer must determine whether the quoted configuration actually meets the project’s BAA or BABA requirements.

“Assembled in USA,” “BAA compliant” and “BABA compliant” are not interchangeable.

Purchasing a Vietnam-manufactured private-label panel

A valid Vietnam origin may reduce China-specific exposure, but only when supported by the actual manufacturing process and origin documentation.

Shipping through Vietnam or attaching a Vietnam label is not sufficient.

A Better Way to Audit a Green Creative Panel Quote

Do not begin by asking only where Green Creative is headquartered.

Start with the quotation.

Step 1: Identify the product generation

Is the product:

• Green Creative ELEVATE 30PAN22DIM
• Green Creative ELEVATE 38PAN24DIM
• ILP VPAN Select
• Another current ILP panel or troffer
• A distributor substitute

Step 2: Check whether the SKU is active

Request written confirmation of:

• Current production status
• Normal lead time
• Minimum order quantity
• Replacement availability
• Planned end-of-life date
• Approved successor model

Step 3: Confirm construction

Determine whether the product is:

• Edge-lit
• Backlit
• A volumetric troffer
• A retrofit kit

Do not allow a supplier to substitute these categories based only on similar lumens and dimensions.

Step 4: Verify origin

Request:

• Fixture label
• Carton label
• Country-of-origin declaration
• Factory name and address
• COO tied to the purchase order
• Written notification before an origin change

Step 5: Revalidate compliance

Confirm the exact:

• UL or ETL file
• DLC product ID
• LM-79 report
• Wattage
• CCT
• Driver
• Dimming range
• Emergency configuration

A historical DLC logo on a 2017 datasheet does not prove current qualification.

What Should Buyers Consider for a New Private-Label Program?

If the goal is simply to replace a small number of installed Green Creative panels, remaining U.S. stock may be the easiest solution.

If the goal is a new distributor, private-label or multi-project program, relying on a legacy panel family creates unnecessary continuity risk.

A buyer evaluating a top LED flat panel manufacturer should prioritize:

• Active product roadmap
• Stable factory allocation
• Current UL and DLC configurations
• Model-specific COO documentation
• Driver and LED change control
• Batch color consistency
• Replacement planning
• Channel-specific packaging

Xmart’s backlit panel program includes 1×4, 2×2 and 2×4 sizes, selectable wattage and CCT, 0–10V dimming, Vietnam manufacturing and OEM packaging options. Buyers can also review its certification information and compare additional options in the guide to commercial lighting manufacturers in Vietnam.

For any new program, request certification and origin evidence for the exact proposed SKU rather than relying on a general factory statement.

Final Conclusion

Where are Green Creative LED flat panels manufactured?

The model-level evidence identifies the original Green Creative ELEVATE edge-lit panels as China-origin products.

But the more important 2026 finding is that the brand’s panel portfolio is in transition:

• Legacy Green Creative panel pages remain online.
• Distributor records mark identifiable models as discontinued.
• Current ILLUMUS materials promote an ILP backlit panel.
• ILP now describes that VPAN series as phasing out.
• U.S. manufacturing capability exists within the group, but only selected models qualify for domestic procurement programs.

The biggest procurement mistake is not choosing China instead of the United States.

It is specifying a product based on an indexed webpage without confirming that the model is still manufactured, replaceable and compliant.

Frequently Asked Questions

Are Green Creative LED panels made in the USA?

The reviewed legacy Green Creative panel model was identified as made in China. ILP has U.S. manufacturing capabilities, but that does not make all Green Creative products U.S.-made.

Is Green Creative still an independent company?

Green Creative is part of Harbour Group’s ILLUMUS lighting platform alongside Industrial Lighting Products.

Are Green Creative 2×4 panels discontinued?

Distributor records identify the audited 38PAN24DIM models as discontinued. Buyers should confirm current production status directly before specifying them.

What replaced the Green Creative panel?

Recent ILLUMUS application materials have promoted ILP’s VPAN Select backlit panel. ILP currently marks VPAN Select as phasing out, so buyers should request the latest successor recommendation.

Is VPAN Select a Green Creative product?

VPAN Select is listed under Industrial Lighting Products. It may be sold through the broader ILLUMUS platform, but it is not the same product as the original Green Creative ELEVATE panel.

Are all ILP products BAA or BABA compliant?

No. Domestic compliance applies only to eligible configurations. Buyers must verify the exact part number and supporting documentation.

Does buying old U.S. inventory create a new Section 301 charge?

Normally, no new import entry occurs when purchasing stock already located in the United States. Tariff and replacement-cost exposure may affect the distributor’s price.