Last reviewed: August 15, 2026
Searching for the origin of an EiKO LED flat panel produces three different answers: Mexico, Vietnam and China.
Surprisingly, all three can be supported by public evidence.
The explanation is not necessarily incorrect labeling. EiKO has sold multiple panel generations across the United States and Canada, and the same BP1 or BP2 product-family name does not guarantee one factory, one country or one production period.
For B2B buyers, “Where is EiKO made?” is the wrong question. The useful question is: “Where was this exact EiKO model and production lot manufactured?”
The Short Answer
EiKO is headquartered in Olathe, Kansas, but its LED panels are produced through an international supply chain.
Available model-level evidence indicates:
- A U.S. distributor lists the BP2 1×4 panel as originating in Mexico.
- Multiple BP2 panels are marketed as TAA compliant.
- Trade records identify specific BP1 panels exported from Vietnam to the United States.
- A Canadian distributor lists a BP1 2×4 panel as originating in China.
- EiKO’s newest 2026 BP1 controls-ready models do not publicly disclose a manufacturing country on their product pages.
The evidence therefore does not support assigning one country to every EiKO LED panel.
EiKO Is a U.S. Lighting Brand, Not a Single-Country Manufacturer
EiKO describes itself as a commercial lighting supplier headquartered in Kansas, with operations in the United States, Canada, Europe and Asia.
That structure is common among North American lighting brands. Product development, certification, inventory, sales and warranty administration may be managed in the United States while manufacturing is performed by qualified overseas or regional suppliers.
A U.S. headquarters establishes the brand’s business location. It does not establish the country of origin of a finished fixture.
That distinction affects:
- TAA eligibility
- USMCA claims
- Customs duty
- Section 301 exposure
- Product marking
- Government bids
- Distributor origin declarations
- Private-label replacement decisions
A Model-Level Origin Map
The public evidence can be summarized as follows:
| Product or series | Public origin evidence | What buyers can conclude |
|---|---|---|
| BP2-14-PS40P-8FCCT-UDIM | Distributor lists MX | Supports Mexico origin for at least some BP2 1×4 inventory |
| BP2-22-PS40P-8FCCT-UDIM | Marketed as TAA compliant | Indicates a compliant supply route, but does not name the country |
| BP2-24-PS50P-8FCCT-UDIM | Marketed as TAA compliant | Origin should still be confirmed for the shipping lot |
| BP1-22PS30P-FCCT-H | Trade records identify Vietnam exports | Supports Vietnam production for recorded shipments |
| BP1-24PS50P-FCCT-H | Trade records show Vietnam; one Canadian seller lists China | Origin may vary by lot, market or data source |
| 2026 BP1-CRO series | No public country disclosed | Requires a current model-specific declaration |
This is why a brand-level statement such as “EiKO panels are made in Mexico” is incomplete.
Evidence for Mexico Production
Stanion Wholesale Electric lists BP2-14-PS40P-8FCCT-UDIM, EiKO’s 1×4 BP2 backlit panel, with country of origin “MX.”
The model matches EiKO’s published information:
- Order code 15367
- 1×4 backlit construction
- Selectable 20/30/40W
- Selectable 3500K/4000K/5000K
- 120–277V
- 0–10V dimming
- 80+ CRI
- DLC Premium
- Five-year warranty
Mexico is a logical origin for a TAA-oriented panel because it is included as a free-trade-agreement country in the current FAR designated-country definitions.
However, one confirmed 1×4 record does not prove that BP2 2×2 and 2×4 panels are produced in the same Mexican factory.
The 2×2 and 2×4 models require their own declarations.
Evidence for Vietnam Production
Detailed trade records identify several EiKO BP1 panels exported from Vietnam to the United States.
The listed models include:
- BP1-22PS30P-FCCT-H
- BP1-22PS30P-40-U
- BP1-22PS30P-FCCT-H-CR
- BP1-24PS50P-FCCT-H
- BP1-24PS50P-FCCT-H-CR
- BP1-24PS50S-FCCT-U
The shipment descriptions identify the EiKO brand, model number, voltage and wattage—not merely a generic “LED light.”
That makes the evidence stronger than a company-wide import record. It shows that specific BP1 backlit panels were shipped from Vietnam.
It still does not prove that every current BP1 panel is made in Vietnam. EiKO could use more than one approved factory, and production routes may change over time.
Buyers researching Vietnam production can also review this independent list of commercial lighting manufacturers and suppliers in Vietnam.
Where the China Evidence Appears
A Canadian industrial supplier lists the BP1-24PS50P-FCCT-H as a China-origin product.
That is significant because trade data also connects the same model to Vietnam.
Several explanations are possible:
- EiKO used China for an earlier production lot and later moved the model to Vietnam.
- China and Vietnam factories produced the same model for different markets.
- The Canadian distributor’s origin field is outdated.
- The trade record identifies the export country but not the legally determined final origin.
- The product underwent a supply-chain change without receiving a new base model number.
The public record does not resolve which explanation is correct.
A distributor should not use the BP1 prefix as evidence of Vietnam origin. Nor should it assume all BP1 products remain China-made because of one reseller entry.
BP1 vs BP2: The Number Does Not Tell You Which Series Is Newer
EiKO’s naming is more complicated than a normal chronological “Gen 1 versus Gen 2” sequence.
The BP2 family includes:
- BP2-14-PS40P-8FCCT-UDIM
- BP2-22-PS40P-8FCCT-UDIM
- BP2-24-PS50P-8FCCT-UDIM
These are 120–277V backlit panels marketed primarily for the U.S. market. The BP2 2×2 product page lists up to 5,000 lumens, while the BP2 2×4 lists up to 6,250 lumens.
EiKO also offers BP1 models with 120–347V input for both U.S. and Canadian projects.
More importantly, the BP2 2×4 page says it is replaced by BP1-24PS50P-FCCT-H. EiKO then introduced an additional 2026 BP1 controls-ready range.
Therefore:
- BP1 does not always mean older.
- BP2 does not always mean the latest replacement.
- The series number does not identify the country.
- The complete model code is essential.
The New 2026 BP1 Controls-Ready Series
EiKO’s newest controls-ready BP1 range includes:
- BP1-14-PS30-8FCCT-HDIM-CRO
- BP1-22-PS30-8FCCT-HDIM-CRO
- BP1-24-PS50-8FCCT-HDIM-CRO
The BP1 controls-ready family uses an integrated sensor socket, selectable wattage, selectable 3500K/4000K/5000K CCT and 120–347V input.
The 2×4 model delivers up to 6,750 lumens at 50W with published efficacy of 135 lm/W.
These models should not inherit the origin of earlier BP1 products. A new driver, control receptacle, optical package or factory can create a separate sourcing route even when the family name remains BP1.
For a 2026 project, request documentation for order codes 16295, 16296 or 16297—not a general statement covering an older BP1 family.
TAA Compliant vs USMCA Qualified
This is an important distinction for Mexico-origin panels.
A Mexico-origin product may qualify as a designated-country end product for applicable TAA procurement. That does not automatically prove that it qualifies for preferential customs treatment under the USMCA.
| Question | TAA | USMCA |
| Main purpose | Government procurement eligibility | Preferential trade treatment |
| Relevant to Mexico | Yes | Yes |
| Requires origin analysis | Yes | Yes |
| Automatically means Made in USA | No | No |
| Automatically guarantees zero duty | No | No |
| Uses identical qualification rules | No | No |
The U.S. Trade Representative explains that rules of origin determine whether a product qualifies for preferential FTA treatment.
A panel assembled in Mexico may contain imported LED boards, drivers, steel, aluminum and optical materials. The importer must determine whether the final product meets the relevant USMCA rule and maintain the required certification of origin.
“TAA compliant” should not be copied into the customs file as proof of USMCA qualification.
The CCT Data Should Also Be Confirmed
EiKO’s BP2 product headings describe selectable 3500K, 4000K and 5000K.
Some product-specification fields on the same official pages display 3000K, 4000K and 5000K.
This is likely a product-data inconsistency, but it matters when the panel is specified for offices, schools or healthcare projects.
A buyer should confirm:
- The physical selector markings
- The current specification sheet
- The DLC-listed CCT options
- Carton label information
- Production sample performance
Do not build a submittal around search-result text when the physical product selector is 3500K.
How Origin Changes Affect Replacement Orders
Origin changes are not automatically quality problems. A qualified factory in Mexico or Vietnam can produce a panel that meets the same published requirements.
The risk appears when the change is not controlled.
A factory or country transition can affect:
- Driver brand and dimming curve
- Minimum dimming level
- LED binning
- 4000K color consistency
- Diffuser material
- Frame finish
- Carton dimensions
- Mounting-hole locations
- Emergency-driver compatibility
- Regulatory file coverage
For a multi-phase project, ask whether later shipments will match the originally approved lot.
A fixture can retain the same lumen rating while producing a visibly different color or dimming response.
Recommended EiKO RFQ Language
Please confirm the finished-product country of origin for the exact EiKO model and production lot quoted. Provide product and carton label photographs, current DLC Product ID, safety-listing reference and any applicable TAA or USMCA documentation. Notify us before changing the approved factory, driver, LED package or country of origin.
For repeat orders, include the original purchase order and production date code.
When Buyers Need a Disclosed-Origin OEM Alternative
EiKO is useful for distributors that need a recognized North American brand, selectable commercial panels and established distribution support.
An OEM program is more appropriate when the buyer needs direct control over:
- Factory country
- Private-label branding
- Driver selection
- Wattage and CCT combinations
- Batch-level color consistency
- Control-ready configurations
- Packaging and pallet quantities
- Certificate-of-origin records
- Factory-change notification
Xmart provides a Vietnam-made commercial backlit panel program for distributors, project suppliers and private-label lighting brands.
Available configurations include 1×4, 2×2 and 2×4 formats, selectable wattage and CCT, 0–10V dimming, North American commercial positioning and channel-specific packaging.
When evaluating an LED flat panel manufacturing partner, compare its documentation control with the actual product specification. Origin transparency is only valuable when the factory can also maintain certification, color, driver and construction consistency.
Review the relevant Xmart certification information and confirm the final model, manufacturing process and target-market requirements before ordering.
Frequently Asked Questions
Where is EiKO headquartered?
EiKO Global is headquartered in Olathe, Kansas.
Are EiKO LED flat panels made in the USA?
The reviewed public evidence does not support a blanket Made in USA claim for EiKO’s LED flat-panel range.
Are EiKO BP2 panels made in Mexico?
A distributor identifies the BP2 1×4 model as Mexico origin. Other BP2 sizes should be verified separately rather than assumed to use the same factory.
Are EiKO BP1 panels made in Vietnam?
Trade records identify several specific BP1 models exported from Vietnam to the United States. The finding applies to the recorded shipments, not automatically to every current BP1 lot.
Are some EiKO panels made in China?
Yes, distributor records identify China as the origin of at least some BP1 inventory. Buyers should confirm whether the record represents an older lot, a separate market or a current supply route.
Are EiKO BP2 panels TAA compliant?
Several BP2 listings identify the products as TAA compliant. Confirm the exact SKU, production lot and current supporting declaration before using the product in a government bid.
Does a Mexico-made EiKO panel qualify for USMCA?
Not automatically. The importer must confirm that the finished product satisfies the applicable USMCA rule of origin and retain the required certification.
What is the difference between EiKO BP1 and BP2 panels?
The differences can include voltage, wattage range, market availability, controls readiness and product generation. The full model number—not only BP1 or BP2—must be compared.
Where are the new EiKO BP1 controls-ready panels made?
The reviewed public EiKO product pages do not state a manufacturing country for order codes 16295, 16296 and 16297. Request a current declaration from EiKO or the authorized distributor.
Final Verdict
EiKO’s LED flat panels cannot be assigned one universal manufacturing country.
Public evidence connects BP2 production with Mexico, specific BP1 shipments with Vietnam and other BP1 channel inventory with China. The latest controls-ready BP1 models require fresh verification.
This is not unusual for a North American commercial lighting brand. The procurement mistake is assuming that the brand name or series prefix guarantees a permanent origin.
Verify the complete SKU, physical label and production lot. If the order depends on TAA, USMCA or a tariff-sensitive origin, require the supporting documentation before issuing the purchase order.
For a factory-direct alternative with disclosed Vietnam production, request an LED panel quotation based on the required size, lumen package, CCT, voltage, controls, certifications, packaging and destination market.
