Halco’s current flat-panel documentation creates an unusual procurement problem.
Halco specification identifies the FPL and FPLCR flat-panel families as TAA compliant. A major U.S. distributor lists model 90519 as made in Cambodia. That is a plausible TAA-designated origin.
However, two distributor pages give different origins for model 90520: one says China, while another uses the country code KH, meaning Cambodia.
The same catalog number should not be assigned two origins on a compliance-sensitive purchase order without further investigation.
Direct Answer
Halco Lighting Technologies is headquartered in Norcross, Georgia, but its commercial LED flat panels are not necessarily manufactured in the United States.
Available model-level evidence shows:
- Halco 90519 is listed by HD Supply with Cambodia as its country of origin.
- Halco 90520 is listed by one distributor as Cambodia and another as China.
- Halco’s current family specification states that its FPL and FPLCR flat panels are TAA compliant.
- Halco’s official specification does not identify the manufacturing country.
- Public channel data is therefore insufficient to establish one permanent origin for every Halco panel or production lot.
B2B buyers should confirm the label and origin of the actual inventory allocated to their order.
The Current Halco Flat-Panel Family
Halco’s current FPL and FPLCR family specification, revised May 21, 2026, covers six stocking models.
| Halco SKU | Product code | Size | Configuration |
|---|---|---|---|
| 90518 | FPL-14-LS-CS-UNV | 1×4 | Standard flat panel |
| 90519 | FPL-22-LS-CS-UNV | 2×2 | Standard flat panel |
| 90520 | FPL-24-LS-CS-UNV | 2×4 | Standard flat panel |
| 90521 | FPLCR-14-LS-CS-UNV | 1×4 | Controls-ready flat panel |
| 90522 | FPLCR-22-LS-CS-UNV | 2×2 | Controls-ready flat panel |
| 90523 | FPLCR-24-LS-CS-UNV | 2×4 | Controls-ready flat panel |
All six models use backlit construction with selectable lumen output and selectable 3500K, 4000K or 5000K CCT.
The current published configurations are:
- 1×4: 20/25/30W
- 2×2: 20/30/35W
- 2×4: 30/35/45W
- 120–277V input
- 0–10V dimming to 10%
- 80+ CRI
- More than 50,000-hour L70
- Five-year limited warranty
- cETLus damp-location rating
- DLC Premium listing
- IC rating
- Title 24 compatibility
- TAA-compliant positioning
These specifications describe what the panels are designed to do. They do not state where each production lot was manufactured.
Cambodia vs China: Why Model 90520 Has Conflicting Origin Records
The conflict becomes clear when the same manufacturer SKU is checked through different distribution channels.
HD Supply’s listing for Halco 90520 identifies China as the country of origin.
A separate LightStoreUSA listing for Halco 90520 identifies the origin as KH, the country code for Cambodia.
There are several possible explanations:
- Halco moved production from China to Cambodia without changing the core SKU.
- Different factories produce the same model for different batches.
- One distributor still holds older China-origin inventory.
- One of the distributor databases contains outdated or incorrect origin data.
- The listed products do not represent the same current TAA-compliant production configuration.
Public information does not show which explanation is correct.
That uncertainty is the important finding. A distributor cannot safely quote “Made in Cambodia” or certify TAA compliance based only on the product number.
Why the 90519 Evidence Is Stronger—but Still Not Final
HD Supply identifies Halco 90519 as a Cambodia-origin product.
The same listing matches Halco’s manufacturer part number and describes the 2×2 backlit panel with selectable 20/30/35W output.
Cambodia is included in the current FAR definition of a least-developed designated country. A qualifying Cambodian end product can therefore be consistent with Halco’s TAA claim.
However, the distributor page should still not be treated as permanent origin evidence. Country-of-origin fields can be outdated, and the same SKU may move between approved factories.
Before a government bid, buyers should request a declaration covering the inventory that will actually ship.
TAA Compliance Does Not Make the Origin Conflict Disappear
Halco’s official product page for model 90519 and its current family specification identify the flat-panel series as TAA compliant.
Under the Federal Acquisition Regulation, a designated-country end product may qualify when it is wholly produced or substantially transformed in an applicable designated country.
China is not currently included in the FAR designated-country list. Cambodia is included as a least-developed country.
Consequently, a China-origin 90520 and a Cambodia-origin 90520 do not present the same TAA position.
This does not prove that Halco’s TAA statement is incorrect. The China entry could describe an old lot, a distributor data error or inventory outside the current compliant supply route.
It does mean that a buyer should not rely on a family-level TAA statement without matching it to the physical product and shipping lot.
FPL vs FPLCR: The Difference Matters When Verifying the SKU
The FPL and FPLCR panels share the same basic size, lumen and CCT options. They are not the same catalog configuration.
FPL is the standard selectable flat panel.
FPLCR adds an integral 3.5mm control receptacle for compatible PIR, microwave or networked control accessories.
This difference affects:
- Catalog number
- DLC Product ID
- Sensor compatibility
- Control package
- Submittal documentation
- Potential rebate treatment
- Emergency configuration
- Final cost
For example, a 2×2 standard panel is SKU 90519. The corresponding controls-ready panel is SKU 90522.
A country declaration for 90519 should not automatically be attached to 90522. The control-ready model may use additional components or even a different production route.
Emergency Models Require Separate Verification
Halco also publishes non-stocking emergency versions:
- 90524: 1×4 FPL with emergency backup
- 90525: 2×2 FPL with emergency backup
- 90526: 2×4 FPL with emergency backup
- 90527–90529: FPLCR versions with emergency backup
The standard stocking models have DLC Product IDs listed in the family specification. The emergency versions do not show equivalent DLC IDs in the same ordering table.
This does not necessarily mean that the emergency models are unsuitable. It means buyers should verify:
- Whether the complete emergency SKU is DLC listed
- Whether the base panel listing is being referenced
- Battery and emergency-driver origin
- TAA status of the finished configuration
- Required 90-minute emergency output
- Installation and test-switch requirements
A declaration for the base panel alone may not cover the finished emergency unit.
The Official Specification and Distributor Data Also Disagree on Wattage
Country of origin is not the only channel-data inconsistency.
The May 2026 Halco specification lists the 2×4 FPL 90520 at 30/35/45W. Some distributor listings still describe it as 30/35/40W.
This is a typical example of product-data drift. A manufacturer updates a generation or driver configuration while older distributor records remain online.
For distributors, outdated wattage data can create:
- Incorrect lighting layouts
- Wrong energy calculations
- Rebate submission problems
- Submittal rejection
- Customer complaints about delivered output
- Mismatched replacement inventory
The manufacturer’s current dated specification and exact DLC record should take priority over undated reseller copy.
Does Cambodia Origin Mean the Panel Is Tariff-Free?
No.
TAA eligibility and customs duty are separate questions.
A Cambodian-origin panel may avoid trade measures that apply specifically to China-origin merchandise. It can still be subject to normal duties, other trade measures or changing country-specific policies.
The importer must verify:
- The correct HTS classification
- The legally supportable country of origin
- Current general and additional duty rates
- Whether substantial transformation occurred in Cambodia
- Component sourcing and manufacturing operations
- Any applicable exclusions or special programs
A “Made in Cambodia” carton label is useful evidence, but it does not by itself prove that the manufacturing process satisfies every customs or procurement rule.
What Buyers Should Request From Halco or the Distributor
For a normal commercial project, a current specification and certification record may be sufficient.
For a federal, municipal or origin-sensitive project, request:
- Exact Halco SKU and product code
- Current country-of-origin declaration
- Photograph of the product rating label
- Photograph of the master-carton origin marking
- TAA compliance letter covering the SKU
- Current DLC Product ID
- cETLus certification reference
- Factory-change history, if available
- Confirmation of the production lot
- Origin confirmation for sensors and emergency options
Recommended Purchase-Order Clause
Country of origin and TAA status must be confirmed for the exact Halco SKU and production lot before shipment. Substitution of factory, country, driver, sensor or emergency component requires prior written approval. Product and carton labels must match the submitted origin declaration.
This clause is especially appropriate for 90520 because current distributor records conflict.
Halco’s Topaz Acquisition Does Not Change Product Origin
Halco acquired Topaz Permanent Lighting Solutions from Southwire in December 2025. The acquisition expands Halco’s U.S. product portfolio and distribution footprint.
It does not establish that Halco or Topaz fixtures are manufactured in the United States.
Brand ownership, warehouse location and product origin remain separate facts. Any future cross-reference between Halco and Topaz panel models should still be verified at SKU level.
When Buyers Need a Factory-Direct Backlit Panel Program
Halco’s FPL family is appropriate for buyers seeking a recognized U.S. commercial brand, domestic inventory and a controls-ready product platform.
A factory-direct program is more relevant when a distributor or lighting brand needs control over:
- Private-label ownership
- Factory and country selection
- Custom wattage combinations
- Five-CCT SKU consolidation
- Driver and sensor approval
- Carton design
- Pallet configuration
- Batch color consistency
- Origin-document retention
- Notification before production changes
Buyers researching alternative supply chains can review these commercial lighting manufacturers in Vietnam.
Xmart provides a Vietnam-made commercial backlit panel program covering 1×4, 2×2 and 2×4 sizes, selectable output, 0–10V dimming, channel-specific packaging and certificate-of-origin support.
When selecting a top LED flat panel manufacturer, origin should be verified together with the bill of materials, factory process, certification file and change-control procedure. A country label without manufacturing evidence is not enough for a compliance-sensitive program.
Buyers should review the relevant certification information and confirm the exact final model before importing or submitting it for a project.
Frequently Asked Questions
Where is Halco Lighting headquartered?
Halco Lighting Technologies is headquartered in Norcross, Georgia, and operates several U.S. distribution locations.
Are Halco LED flat panels made in the USA?
The reviewed Halco documentation does not support a blanket Made in USA claim for its FPL flat-panel family.
Where is Halco 90519 manufactured?
HD Supply currently lists Halco 90519 as originating in Cambodia. Buyers should verify the actual lot and product label before relying on that origin.
Where is Halco 90520 manufactured?
Public distributor records conflict. One listing says China, while another lists Cambodia. Obtain a current model- and lot-specific declaration.
Are Halco FPL panels TAA compliant?
Halco’s May 2026 family specification identifies the FPL and FPLCR panels as TAA compliant. Buyers should ensure the delivered production lot matches the compliant supply route.
Can a China-made Halco panel be TAA compliant?
China is not a TAA-designated country under the current FAR list. A China-origin end product would not normally qualify as a designated-country product. Contract-specific rules and product documentation should be reviewed by the responsible procurement team.
What is the difference between Halco FPL and FPLCR?
FPL is the standard selectable flat panel. FPLCR includes an integral 3.5mm receptacle for compatible lighting controls and uses a separate product code and DLC Product ID.
Is the Halco 90520 a 40W or 45W panel?
The current Halco family specification lists selectable 30/35/45W settings. Some distributor pages still show 30/35/40W, which may reflect older product data.
Final Verdict
Halco’s current FPL flat-panel family appears to use a TAA-compliant sourcing route, with Cambodia identified as the origin of at least some channel inventory.
However, model 90520 demonstrates why brand-level and SKU-level claims are not sufficient. The same manufacturer part number currently appears with both China and Cambodia origin data.
For ordinary commercial projects, that conflict may be an administrative issue. For government procurement, tariff planning and origin-sensitive bids, it can determine whether the product is eligible and whether the landed-cost calculation is correct.
Verify the actual lot, not just the online catalog number.
For an origin-documented private-label alternative, request an LED panel quotation with the required dimensions, lumen range, CCTs, controls, emergency configuration, certifications, packaging and destination market.
