Low-Voltage Route Lighting For Mining & Tunnels
24V Tunnel & Mining LED Strip
A 24V DC silicone-extruded linear lighting solution for mine access ways, tunnel work zones, service passages and industrial corridors. Designed for continuous route visibility with planned power zones, configured cable terminations and practical on-site maintenance.
Safety performance depends on the completed system design, including power supply, cable, connector, end seal and installation method.
Safety by Design for Underground Route Lighting
Engineered for controlled environments, focusing on reliable architecture and continuous visibility.
24V DC System Architecture
A lower-voltage lighting format for projects designed around 24V DC power distribution. It supports practical route zoning and avoids using mains voltage directly at the strip level.
Continuous Visual Guidance
A continuous line of light helps reduce perceived dark intervals along access ways, work zones and service routes, supporting clearer orientation for personnel and maintenance teams.
IP65 Silicone-Extruded Housing
The supplied configuration uses a silicone-extruded housing and is listed as IP65. Confirm the final protection level for the complete strip, connector and end-seal assembly before release.
Planned Maintenance Zones
A properly segmented 24V layout helps teams identify power sections, inspect connections and plan maintenance around defined route zones.
"For mining and tunnel lighting, safety is not a single feature. It is the result of suitable voltage selection, continuous illumination, approved protection details and disciplined installation planning."
What Is a 24V Mining LED Strip?
A 24V mining LED strip is a low-voltage, silicone-extruded linear lighting product designed for short, controlled underground and industrial route sections. It delivers continuous illumination along mine access ways, tunnel work areas and service corridors when the system is planned with appropriate feed points.
Unlike standard indoor LED tape, a mining route-lighting system must be selected around electrical loading, cable length, connection protection, environmental exposure and maintenance access. The 24V format is especially practical where the project already operates on a 24V DC architecture or where the route can be divided into manageable lighting zones.
24V Tunnel & Mining LED Strip Manufacturer & Supplier
At Xmart, we configure 24V mining LED strip systems around the actual route and installation conditions. We help project teams define output level, reel length, cable exit, connector format and feed-point arrangement before production.
For underground route lighting, the strip is only one part of the solution. The final performance depends on how the product, power supply, cable, end seal and installation layout work together on site.
24V System Review
Review product load and feed-point logic for projects using a 24V DC architecture.
Custom Termination
Confirm cable direction, lead length, connector type and end-sealing requirements.
Technical Confirmation
Review the final specification, dimensions and configuration before production release.
Project Supply Support
Support samples, project quotations and repeat production for phased installation.
24V Mining LED Strip Specifications
| Reference Model | BRT-1000-24V-DC-S |
|---|---|
| Input Voltage | 24V DC |
| Profile Size | W15 x H6 mm |
| LED Type | SMD2835 |
| LED Density | 120 LEDs/m |
| Power Options | 5W/m or 9W/m |
| Nominal Output Options | 600 lm/m or 1200 lm/m |
| CCT Options | 2700K / 3000K / 4000K / 5000K / 6000K |
| Housing | Silicone Extrusion |
| Standard Reel Lengths | 10m / 20m |
| Protection Rating | IP65 listed for the supplied configuration |
| Application | Mines, tunnels and industrial routes |
Reel length is not a universal single-feed limit. Final feed-point spacing must be calculated from watts per metre, cable size, route layout, allowable voltage drop and required brightness consistency.
What Each Product Feature Means on Site
Review the practical value and required pre-release confirmations for each design feature.
| Design Feature | Project Value | Confirm Before Release |
|---|---|---|
| 24V DC Input | Supports low-voltage route-lighting architecture | Compatible power supply, circuit protection and feeder cable |
| Continuous Linear Output | Helps create clearer visual guidance along the route | Required output level and lighting layout |
| Silicone Extrusion | Provides a protected low-profile housing format | Final environmental and cleaning requirements |
| IP65 Listed Configuration | Suitable for specified dust and water-exposure conditions | Connector and end-seal rating for the complete system |
| 10m / 20m Reel Options | Supports planned route zoning | Feed-point layout and installation segment length |
| 600 / 1200 lm/m Options | Allows output selection by route requirement | Required visibility level and energy target |
24V vs 36V vs 48V: Select the Voltage by Route Design
24V System
Short, zoned route sections
Best for existing 24V DC infrastructure and planned feed points.
48V System
Extended linear routes
Better for longer corridors where reducing feed points is a major objective.
Note: Higher voltage reduces current for the same load, but it does not replace project-specific voltage-drop calculations. Select voltage according to route length, strip load, feeder cable, site access and maintenance strategy.
Plan the 24V System Before Installation
A 24V mining lighting route should be planned as a series of controlled lighting zones.
Final wiring, circuit protection, power supply selection and installation must be completed by qualified personnel in accordance with local electrical and mine-site requirements.
Safety Notice
24V does not automatically mean intrinsically safe or explosion-proof. Hazardous-area use requires the exact product and installation to meet the applicable site approval requirements.
Designed for Controlled Mining and Tunnel Zones
Mine Access Ways
Continuous route lighting for defined underground personnel paths.
Tunnel Work Zones
Flexible linear illumination for temporary construction sections and changing work fronts.
Equipment Service Passages
Low-profile route lighting for maintenance-sensitive utility areas.
Conveyor Walkways
Clearer continuous illumination around inspection and equipment access routes.
Documentation That Supports Safer Project Decisions
For mining and tunnel projects, a product photo is not enough. Project teams need the final configuration, electrical data and protection details to be reviewed before deployment.
- Approved Product Specification
- Profile and Connection Drawing
- Electrical Loading Information
- Applicable Document Review for the Destination Market
Do not publish claims for IP67, IK10, flame retardancy, tensile strength, hazardous-area approval, warranty or certification unless the exact finished 24V configuration is supported by valid documentation.
24V Mining LED Strip FAQ
Why is 24V used for mining and tunnel route lighting?
Does 24V make the system safer?
How long can a 24V mining LED strip run from one feed point?
Is the product IP67 or IP68?
Is the 24V mining LED strip explosion-proof?
Can Xmart help with the power supply and connectors?
Request a 24V Mining Lighting Review
Share the route layout, target output and installation condition. Xmart will help review a practical 24V strip configuration, reel format, connection approach and planned power zones.
